您的位置:首页网页设计PHP技巧 → 不用GD库生成当前时间的PNG格式图象的程序

不用GD库生成当前时间的PNG格式图象的程序

时间:2004/11/7 3:20:00来源:本站整理作者:蓝点我要评论(0)

该程序是不用GD库可以生成当前时间的PNG格式图象,给人大开眼界,很有参考价值. teaman整理


       
    function set_4pixel($r, $g, $b, $x, $y)
    {
    global $sx, $sy, $pixels;


    $ofs = 3 * ($sx * $y + $x);
    $pixels[$ofs] = chr($r);
    $pixels[$ofs + 1] = chr($g);
    $pixels[$ofs + 2] = chr($b);
    $pixels[$ofs + 3] = chr($r);
    $pixels[$ofs + 4] = chr($g);
    $pixels[$ofs + 5] = chr($b);
    $ofs += 3 * $sx;
    $pixels[$ofs] = chr($r);
    $pixels[$ofs + 1] = chr($g);
    $pixels[$ofs + 2] = chr($b);
    $pixels[$ofs + 3] = chr($r);
    $pixels[$ofs + 4] = chr($g);
    $pixels[$ofs + 5] = chr($b);
    }
    //生成数字图象的函数    
    function draw2digits($x, $y, $number)
    {
    draw_digit($x, $y, (int) ($number / 10));
    draw_digit($x + 11, $y, $number % 10);
    }
        
    function draw_digit($x, $y, $digit)
    {
    global $sx, $sy, $pixels, $digits, $lines;
            
    $digit = $digits[$digit];
    $m = 8;
    for ($b = 1, $i = 0; $i < 7; $i++, $b *= 2) {
        if (($b & $digit) == $b) {
        $j = $i * 4;
        $x0 = $lines[$j] * $m + $x;
        $y0 = $lines[$j + 1] * $m + $y;
        $x1 = $lines[$j + 2] * $m + $x;
        $y1 = $lines[$j + 3] * $m + $y;
        if ($x0 == $x1) {
            $ofs = 3 * ($sx * $y0 + $x0);
            for ($h = $y0; $h <= $y1; $h++, $ofs += 3 * $sx) {
            $pixels[$ofs] = chr(0);
            $pixels[$ofs + 1] = chr(0);
            $pixels[$ofs + 2] = chr(0);
            }
        } else {
            $ofs = 3 * ($sx * $y0 + $x0);
            for ($w = $x0; $w <= $x1; $w++) {
            $pixels[$ofs++] = chr(0);
            $pixels[$ofs++] = chr(0);
            $pixels[$ofs++] = chr(0);
            }
        }
        }
    }
    }
        
    //将文字加入到图象中 
    function add_chunk($type)
    {
    global $result, $data, $chunk, $crc_table;


    // chunk :为层
    // length: 4 字节: 用来计算 chunk 
    // chunk type: 4 字节
    // chunk data: length bytes
    // CRC: 4 字节:  循环冗余码校验
        
    // copy data and create CRC checksum
    $len = strlen($data);
    $chunk = pack("c*", ($len >> 24) & 255,
        ($len >> 16) & 255,
        ($len >> 8) & 255,
        $len & 255);
    $chunk .= $type;
    $chunk .= $data;


    // calculate a CRC checksum with the bytes chunk[4..len-1]
    $z = 16777215;
    $z |= 255 << 24;
    $c = $z;
    for ($n = 4; $n < strlen($chunk); $n++) {
        $c8 = ($c >> 8) & 0xffffff;
        $c = $crc_table[($c ^ ord($chunk][$n])) & 0xff] ^ $c8;
    }
    $crc = $c ^ $z;


    $chunk .= chr(($crc >> 24) & 255);
    $chunk .= chr(($crc >> 16) & 255);
    $chunk .= chr(($crc >> 8) & 255);
    $chunk .= chr($crc & 255);


    // 将结果加到$result中
    $result .= $chunk;
    }



    //主程序


    $sx = 80;
    $sy = 21;
    $pixels = "";
            
    // 填充
    for ($h = 0; $h < $sy; $h++) {
    for ($w = 0; $w < $sx; $w++) {
        $r = 100 / $sx * $w + 155;
        $g = 100 / $sy * $h + 155;
        $b = 255 - (100 / ($sx + $sy) * ($w + $h));
        $pixels .= chr($r);
        $pixels .= chr($g);
        $pixels .= chr($b);
    }
    }
        
    $date = getdate();
    $s = $date["seconds"];
    $m = $date["minutes"];
    $h = $date["hours"];
    $digits = array(95, 5, 118, 117, 45, 121, 123, 69, 127, 125);
    $lines = array(1, 1, 1, 2, 0, 1, 0, 2, 1, 0, 1, 1, 0, 0, 0, 1, 0, 2, 1, 2, 0, 1, 1, 1, 0, 0, 1, 0);
        
    draw2digits(4, 2, $h);
    draw2digits(30, 2, $m);
    draw2digits(56, 2, $s);
    set_4pixel(0, 0, 0, 26, 7);
    set_4pixel(0, 0, 0, 26, 13);
    set_4pixel(0, 0, 0, 52, 7);
    set_4pixel(0, 0, 0, 52, 13);


    // 创建循环冗余码校验表
    $z = -306674912;  // = 0xedb88320
    for ($n = 0; $n < 256; $n++) {
        $c = $n;
        for ($k = 0; $k < 8; $k++) {
            $c2 = ($c >> 1) & 0x7fffffff;
            if ($c & 1) $c = $z ^ ($c2); else $c = $c2;
        }
        $crc_table[$n] = $c;
    }


    // PNG file signature
    $result = pack("c*", 137,80,78,71,13,10,26,10);
        
    // IHDR chunk data:
    //   width:              4 bytes
    //   height:             4 bytes
    //   bit depth:          1 byte (8 bits per RGB value)
    //   color type:         1 byte (2 = RGB)
    //   compression method: 1 byte (0 = deflate/inflate)
    //   filter method:      1 byte (0 = adaptive filtering)
    //   interlace method:   1 byte (0 = no interlace)
    $data = pack("c*", ($sx >> 24) & 255,
    ($sx >> 16) & 255,
    ($sx >> 8) & 255,
    $sx & 255,
    ($sy >> 24) & 255,
    ($sy >> 16) & 255,
    ($sy >> 8) & 255,
    $sy & 255,
    8,
    2,
    0,
    0,
    0);
    add_chunk("IHDR");


    // 以下不敢乱翻译,请自行参考
    //    scanline:
    //        filter byte: 0 = none
    //        RGB bytes for the line
    //    the scanline is compressed with "zlib", method 8 (RFC-1950):
    //        compression method/flags code: 1 byte ($78 = method 8, 32k window)
    //        additional flags/check bits:   1 byte ($01: FCHECK = 1, FDICT = 0, FLEVEL = 0)
    //        compressed data blocks:        n bytes
    //            one block (RFC-1951):
    //                bit 0: BFINAL: 1 for the last block
    //                bit 1 and 2: BTYPE: 0 for no compression
    //                next 2 bytes: LEN (LSB first)
    //                next 2 bytes: one's complement of LEN
    //                LEN bytes uncompressed data
    //        check value:  4 bytes (Adler-32 checksum of the uncompressed data)
    //
    $len = ($sx * 3 + 1) * $sy;
    $data = pack("c*", 0x78, 0x01,
        1,
    $len & 255,
    ($len >> 8) & 255,
    255 - ($len & 255),
    255 - (($len >> 8) & 255));
    $start = strlen($data);
    $i2 = 0;
    for ($h = 0; $h < $sy; $h++) {
    $data .= chr(0);
    for ($w = 0; $w < $sx * 3; $w++) {
        $data .= $pixels[$i2++];
    }
    }



    // calculate a Adler32 checksum with the bytes data[start..len-1]
    $s1 = 1;
    $s2 = 0;
    for ($n = $start; $n < strlen($data); $n++) {
    $s1 = ($s1 + ord($data[$n])) % 65521;
    $s2 = ($s2 + $s1) % 65521;
    }
    $adler = ($s2 << 16) | $s1;


    $data .= chr(($adler >> 24) & 255);
    $data .= chr(($adler >> 16) & 255);
    $data .= chr(($adler >> 8) & 255);
    $data .= chr($adler & 255);
    add_chunk("IDAT");


    // IEND: marks the end of the PNG-file
    $data = "";
    add_chunk("IEND");


    // 列印图象
    
    echo($result);
?>


//如何调用,其实很简单,将上面存为Timeimg.php
//然后新建一个页面如下:



   
    test
   
   
   
      //以图象连接方式调用PHP文件

 


 


相关阅读 Windows错误代码大全 Windows错误代码查询激活windows有什么用Mac QQ和Windows QQ聊天记录怎么合并 Mac QQ和Windows QQ聊天记录Windows 10自动更新怎么关闭 如何关闭Windows 10自动更新windows 10 rs4快速预览版17017下载错误问题Win10秋季创意者更新16291更新了什么 win10 16291更新内容windows10秋季创意者更新时间 windows10秋季创意者更新内容kb3150513补丁更新了什么 Windows 10补丁kb3150513是什么

文章评论
发表评论

热门文章 没有查询到任何记录。

最新文章 如何恢复Discuz!7.0被 CSS实现Tab技巧Linux配置DHCP服务器实例:linux配置教程如何在IIS7下设置支持PHP程序PHP技巧--通过COM使用ADODB

人气排行 dedecms数据库表和字段说明最小化数据传输——在客户端存储数据php如何自动跳转中英文页面如何在IIS7下设置支持PHP程序php批量获取首字母(汉字、数字、英文)经典php实现大文件上传源代码Windows环境PHP的session不能正常使用解决办PHP聊天室技术