PPPOE服务器与客户端配置 -pc6资讯

您的位置：首页 → 网络冲浪 → 网络技术 → PPPOE服务器与客户端配置

PPPOE服务器与客户端配置 时间：2009/4/5 16:17:00来源：本站整理作者：我要评论(0)

PPPOE服务器与客户端配置Server configuration
    R2#sh running-config
    Building configuration...
    Current configuration : 920 bytes
    !
    version 12.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname R2
    !
    !
    username cisco password 0 cisco
    memory-size iomem 15
    ip subnet-zero
    !
    !
    !
    vpdn enable
    !
    vpdn-group 1
     accept-dialin
      protocol pppoe
      virtual-template 1
    !
    !
    !
    !
    voice call carrier capacity active
    !
    !
    !
    !
    !
    !
    !
    !
    !
    mta receive maximum-recipients 0
    !
    !
    !
    !
    interface Loopback0
     ip address 10.0.0.1 255.255.255.0
    !
    interface FastEthernet0/0
     no ip address
     duplex auto
     speed auto
     pppoe enable
    !
    interface FastEthernet0/1
     no ip address
     shutdown
     duplex auto
     speed auto
    !
    interface Virtual-Template1
     ip unnumbered Loopback0
     peer default ip address pool cisco
     ppp authentication chap
    !
    ip local pool cisco 10.0.0.10 10.0.0.20
    ip classless
    ip http server
    !
    !
    !
    call rsvp-sync
    !
    !
    mgcp profile default
    !
    dial-peer cor custom
    !
    !
    !
    !
    !
    line con 0
    line aux 0
    line vty 0 4
    !
    !
    end

    client configuration
    R1#sh run
    R1#sh running-config
    Building configuration...
    Current configuration : 870 bytes
    !
    version 12.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hos

相关视频

没有数据

文章评论

查看所有0条评论>>